Oceanic AIR XS II User Manual

AIR XS IIRegulator / BC Inflator SystemOwner's GuideOCEANIC®

10CARE AND MAINTENANCEYour AIR XS II is a reliable piece of equipment that will continue to worklike new for many years to come, if cared for properly

11As soon as possible at the end of each day of diving:• Flush the exterior of all components thoroughly with fresh water toremove dissolved salt and

12TRANSPORT AND STORAGE• If possible, transport your BC and AIR XS II Assembly (preferablydry) in a padded carrying case or equipment bag separated f

13GUIDELINE FOR MINIMUM SERVICE INTERVALSDue to variations of use and storage time that the AIR XS II may be sub-jected to, the Guidelines and defined

14COLD WATER DIVINGSpecialized training and skills required for cold water diving will reduceeffects that cold water Temperatures can impose upon the

15AIR XS IIRECORDSSerial No. ________________________________Date of Purchase ________________________________Oceanic Dealer _________________________

162002 Davis StreetSan Leandro, CA 94577Tel: 510-562-0500Fax: 510-569-5404http://www.OceanicWorldwide.com© 2002 Design, 2004 Doc. No. 12-2116-r02 (9

2THANK YOU for purchasing an Oceanic AIR XS II Regulator/Inflator system. With this system, you have -• 2 methods to inflate the BC• 2 methods to d

3CONTENTSINTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2COMPONENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4LIMITED TWO-YEAR WARRANTYRefer to the Warranty Registration form provided by your AuthorizedOceanic Dealer or register on-line at:www.OceanicWorldwid

5COMPATIBILITY AND INSTALLATIONThe AIR XS II low pressure inflator hose is compatible with all Oceanicfirst stage regulators. It may not be compatibl

6CORRUGATED HOSES/PULL CONNECTORTwo corrugated hoses are joined by a Pull Connector. By pulling on therounded Pull Connector you can operate the Rapi

7INFLATOR OPERATIONWARNING: If you ever hear air, or see bubbles,escaping from the area around any of the AIR XS II'sconnectors, or if the BC fa

8BC DEFLATION USING THE RAPID EXHAUST VALVE (REV)The Rapid Exhaust Valve (REV) is located inside the upper (shoulder) unitof the Inflator Assembly. I

9BC DEFLATION USING THE MANUAL INFLATOR/DEFLATORBUTTONTo deflate the BC through the Mouthpiece, hold the lower (power) unithigher than the top of the